Easy Guide to Install Artificial Grass on Concrete
Artificial grass can change concrete floors and patios into beautiful, lush green areas. But the opposite might also happen. It will make your garden area look lumpy and waterlogged if fake grass is not installed correctly. So, be very careful when installing.
Step # 1 Gather the required Equipment
The first step is to collect the required equipment you need to install the astroturf. They are:
Hammer drill
Artificial grass joining tape
Underlay
Adhesives and pins
Kiln sand
Stiff and power brush
Sharp Cutting knife
Step # 2 Prepare the Surface
The second step of the easy guide about installing synthetic turf on concrete is to prepare the surface. Make sure to clean any dirt, sand, or gravel for a smooth surface for your turf.
Step # 3 Check the Drainage
This is a significant step; check the existing drainage of your concrete path. The pathway to be covered with fake grass needs to be appropriately drained. It should have a slight fall/dip.
Step # 4 Measure & Lay Artificial Grass
Now, it’s time to measure the required size of grass you need and lay it properly. You can use a knife to cut the grass section appropriately required. After applying the grass, secure the joint using glue or adhesive.
Step # 5 Add Sand and Brush
The last step of the easy guide to installing artificial grass on concrete is when your artificial turf is fully dry, make sure to spread the sand evenly and brush the grass to keep the fibers upright.
