You can take on this job or just hire a general contractor in Los Angeles to ensure that the job is done properly. Check local ordinances to know if you need a permit. Plan your driveway’s size, shape, and route. Draw out the basic outline of your driveway. You will want to consider the overall length and width, as well as where you’ll park your vehicles and whether or not you’ll need space to turn around. You will need wood to build your forms and stakes to reinforce them. Pine board that measures 1 inch by 4 inches is usually sufficient for laying a driveway. Build and install the forms. You can either mix your own concrete or order ready-mix concrete from a supplier. You will need to pour the concrete into the furthest corner of the boundaries, and then spread it evenly using a rake or shovel. The concrete should overflow the edges of the boundaries by a few centimeters. You will also need to use a float or a screed to level the surface of the concrete and remove any air bubbles. After that, you can use a broom or a brush to create a textured finish on the concrete if you want. You will need to cover the concrete with plastic sheets or curing blankets and keep it moist for at least a week to allow it to cure properly.
