Adrian Super Painting Services

The fluid section of the pump is the part that is responsible for pressurizing and moving latex and oil-based paints through the machine and then out of the nozzle.

Many people wonder if they can use latex paint in an HVLP gun. You can, but you have to thin this paint first, as it can be much thicker than other paints.

In a single piston pump, the inlet is one of two interior ball checks that control the flow of paint through the fluid section. As the rod rises, paint flows upwards.

Space heaters are a convenient way to feel warm on a cold winter morning. But they are also one of the top ten leading causes of house fires in the US, so be sure to never leave yours unattended.

While pigments are what gives paint color, they are pretty useless without something to bind them together. As such, binders are applied to pigments to essentially glue them together and make them stick to surfaces.

Can you use an airless pump spray to paint a car? The answer is no! This is because the flow of material or paint is too high to give a fine finish, thus making it unsuitable for automotive applications.

There are certain areas where it is advised that pressure washers do not spray water. These areas include on air conditioning equipment, in electrical outlets, on light fixtures, and in vents.

An HVLP sprayer is a high volume low pressure gun that doesn’t require the thousands of dots per inch of pressure that other guns do. Instead, more air is used to send the paint up the hose and through the tip.

Many companies that rent airless spray guns do not allow them to be used with oil-based products, so make sure to check with the business before renting if you will be using oil-based paint.

If the latex paint is too thick, it won’t come out of the gun properly. If you’re seeing splotches, or the paint seems stuck in the gun, try diluting the paint with water.

When spray-painting indoors, like in a garage or paint booth, make sure you have adequate ventilation. Keep anything you don’t want to get paint on away from the area, and wear protective gear such as dust masks, goggles, and overalls.

When painting with a latex-based paint, the airless pump can be cleaned up with water. Oil-based paints need to be cleaned up with turpentine or mineral spirits.

Two factors determine the flow rate in airless pump sprays: tip orifice size and pressure. Use the wrong tip size or have too much pressure and you could end up with gaps and an uneven spray pattern.

If your power washer suddenly stops working, or if you see a noticeable decline in water pressure, the first thing you’ll want to check is the hoses. Leaks can lower the pressure being put out by the system.

Did you know that airless paint sprayers can get the job done in much less time than a conventional air sprayer? This is because airless systems deposit a thicker, uniform coat onto the substrate thus significantly reducing the number of passes ne... more

Pressure washers work by combining a cleaning solution with water and spraying the mix with force at the object that is being cleaned.

When you see raw paint on the pump rod, it’s a sign the packing is worn or the nut is loose. Gently tighten the nut, but avoid overdoing it. An overly tight nut will strain the pump and impact performance.

Did you know that an airless spray system wastes much less paint than a conventional air system? This is because an airless system generates very little overspray compared to an air powered system.

It goes without saying that pointing the spray gun at yourself or at other people is a terrible idea. Keep in mind the airless pumps create pressures that can go high enough to penetrate the skin, so be responsible.

Airless pump systems allow you to control the flow of the spray! This is advantageous in that there is never an overspray problem, the opposite of air based pump systems. The end result is one of compression free perfection!

"Pressure washers are powerful cleaning tools that enable you to quickly and easily remove dirt and grime from your home exterior, sidewalks, decking and driveway," writes the website eHow.

When we think of solvents, noxious chemicals usually come to mind. However, did you know that the water we drink is a solvent as well? In fact, water-based paints are fast becoming the norm for today's increasingly environmentally conscious society.

Is your airless pump leaking fluid or paint near the wet cup reservoir? It’s a classic sign the throat packings have deteriorated, and it’s time to bring the pump in for maintenance and repair.

"Basic air compressors pressurize air through mechanical pistons, creating a smaller volume within the tank," the website wiseGEEK explains. "As a result, the pressurized air moves rapidly from the compressor, through attached hosing, and finally ... more

Did you know that painting with an airless pump system uses less paint than traditional painting using brushes and rollers? Indeed, this can add up to a significant amount of money in paint costs, not to mention the cost of supplies and accessories.

There are two pump types that can be used on an airless sprayer. These types include a diaphragm and piston. The piston type is made for heavy-duty use.

To clean an airless pump, simply turn off the power, adjust the pressure to the lowest setting and turn down the prime valve. Before cleaning, take off the filter and put the gun together without the filter.

Make sure to choose a tip that is not too big for your airless pump. Check your manual for the optimum orifice size. If the tip is too big, the paint atomizes.

"Painters must match spray paint compressor specifications with the sprayer's abilities," the website wiseGEEK writes. "Compressors that offer high air volume may damage the sprayer by forcing too much pressure through the mechanical parts."

Home heaters are a modern innovation, but the need to keep the house toasty has been around since the time of the ancient Romans. Some of their buildings had a system that allowed furnace-heated air to travel under floors.

One of the benefits of airless pumps is that they are speedy! Airless pumps sprayers are faster than traditional methods of applying paint, stain, or lacquer and this means that more jobs can be completed in less time. This saves time and therefor... more

Never leave the airless pump unit pressurized as it can be unsafe if a person, by mistake, pulls the trigger and is hit by the fluid. You should always depressurize the unit and store in a locked place.

Did you know that the overspray that comes off a conventional air spray system is actually paint that's being wasted? This is because the paint in the overspray does not actually reach the target and ends up somewhere else.

Gas-powered pressure washers can be used at home or for professional use. Home systems are great for washing boats and fences. Professional-grade washers, on the other hand, are powerful enough to strip paint and remove graffiti from walls.

Spray painting history: Spray painting is said to have been invented by painter and sculptor Francis Davis Millet in the year 1892.

In 1940, Canadian citizen Norman Breakey invented the first paint roller because of a shortage of materials, such as hog hair, that were usually used in the production of paintbrushes.

One of the benefits of airless sprayers gas sprayers is that they can be used with a wide range of paint coatings, including oil based, latex, enamel, stain and lacquer. Airless gas sprayers are perfect for line spraying for utility and constructi... more

Research done by the Painting and Decorating Contractors of America (PACE), an organization of professional painters and painting contractors and related industry associates, found that airless spray pump systems were twice as fast as rollers and ... more

"Despite their notable cleaning abilities, power washers do use quite a lot of water," the website eHow writes. "Knowing the facts about power washing and power washers can help minimize water consumption."

The cylinder of an airless paint pump is the part of the system that houses the rod or piston, fillers and balls inside of the fluid section.

The famous modern-day television painter Bob Ross once said, "All you need to paint is a few tools, a little instruction, and a vision in your mind."

You should never use a damaged hose with an airless pump sprayer. Since pump uses a very high pressure, even a small defect can be unsafe and cause an accident.

Airless pump spray systems are ideal for odd, uneven surfaces like textured walls or popcorn ceilings. This is where airless pump systems have the advantage over non-airless systems: there is no stop and go, as with ordinary methods, and there is ... more

In addition to their versatility, airless sprayers offer a number of advantages that contribute to their widespread use. They’re comparatively compact, easy to handle, and designed to be moved from one job site or station to another.

"No matter what pressure washer you use, the pressure washing method involves pressure, water flow force, cleaning solution and heat," the website eHow writes.

Having a steady hand is important when painting with airless sprayers. Make sure to hold the spray gun as straight as you possibly can. Tilt it in any direction and you might end up with an uneven finish.

When it comes to purchasing a pressure washer, it is important to first consider the type of cleaning project you will use the pressure washer to complete.

There are significant advantages to painting with airless pump sprayers. Projects that require gallons of paint can be done faster and with better results with airless sprayers than with paint rollers and brushes. 

Spray painting history: A man by the name of Edward Seymour is said to be the inventor of aerosol spray paint, which made its debut in 1949.

The famous writer Albert Camus remarked not on the finished results of painting but about its process: "It is not your paintings I like; it is your painting."

Make sure to move your gun quickly, so that your paint doesn’t drip. Spraying too slowly causes too much paint to build up on the work surface, which means the excess will run.

One factor you’ll want to consider when looking at spray guns is how light they are, and how quietly they run. For painting projects in residential neighborhoods or busy office buildings, a quiet spray gun is ideal.

When airless sprayers are used to apply coatings, they offer significant advantages: They’re up to four times faster than other methods. They produce an even coat on all surfaces, which produces a higher quality finish. And they accommodate a wide... more

If you are using an airless pump sprayer for the first time, make sure to connect all the attachments properly and tightly in order to avoid leakage of paint.

Why doesn’t everyone use an airless paint sprayer? They take time to clean properly, and there is some paint that’s wasted in the process if they are used incorrectly.

If you’re in the middle of a job when the throat packings begin to show signs of wear, try tightening the packing nut. This may temporarily offset the failing packing, so you have time to finish the job before you bring the pump in for repair.

Did you know that it is not required to thin the paint to spray with an airless pump sprayer? This is simply because thinning the paint reduces the coverage of the paint on the surface.

While paint certainly adds a lot of color to our lives, another way to think about it is as protection. Much as we put on long-sleeved shirts to protect ourselves from exposure, a coat of paint seals a surface and protects it from damage.

Paint thinners are usually the agents of choice when lowering the viscosity of paint. However, did you know that airless spray systems don't really need them as much? Instead, inline heaters can be used to do the same job.

One of the advantages of using an airless paint sprayer is consistency. An airless system is generally able to effectively lay down thick yet uniform coats over large areas, even if the surfaces being sprayed are heavily textured.

Wearing protective gear when working with an airless sprayer is highly recommended. This is because the paint shooting out of the tip has enough force to break skin and force paint inside the wound. As such, proper handling and care should always ... more

The prices for airless spray guns vary depending on quality and their construction. You’ll want to make sure the motor is powerful enough for your job. If you only need one on an occasional basis, renting might be a good option.

When it comes to portability, an airless spray system is hard to beat. Not only is it more compact than an air compressor, it also usually comes with its own trolley. This makes moving to different areas of the worksite much easier.

One of the many benefits of airless pumps is that there are so many different types, styles and sizes available! There are airless gas pumps, airless hydraulic pumps, airless air pumps, and airless electric pumps.

Every job requires an appropriate amount of pressure. You should not raise the air pump pressure unnecessarily. If the pressure is allow to become too high, it could be dangerous.

Piston airless sprayers work well for those who’d like more control over their device. The user can operate these with a foot valve or inlet valve.

The tip of an airless sprayer do is what creates that nice fan-shaped spray. Choose a tip based on the thickness of your stain or varnish.

While paint appears to be a homogenous liquid, did you know that it is made up of very different components? Typically, paint is composed of the color component or pigment and a vehicle component made up of a binder and solvent.

Diaphragm pumps cost less than piston pumps. They also offer good control over a full range of pressure values, provide better atomization, are easier to repair, and have lower maintenance costs.

Is your airless sprayer having trouble maintaining a proper fan pattern? It’s probably time to replace the tip. If that doesn’t resolve the problem and the pump can’t maintain pressure, it’s a sign of more serious issues.

When looking for airless sprayers, customers love models that are easy to clean and have dependable spray patterns, though they do recommend buying extra hosing for large jobs. The most popular are the ones that remain affordable, while still spra... more

The spray gun used in an airless pump system, with high pressure, forces fluid through the small nozzle spray tip. This means the fluid emerges as a solid sheet or stream at a high speed. The advantage of this is ease of control with each applicat... more

The pressure delivered by a pressure washer is measured in psi, which stands for pounds per square inch. The water supply required by a pressure washer is measured in gpm, which stands for gallons per minute.

"Spray in an inconspicuous area to test the nozzle before pressure-washing more visible areas," Popular Mechanics advises. "This way, if you are using too narrow a nozzle or find that you need to refine your technique, at least you won't harm a no... more

Airless pumps help pressurize the paint you’re spraying, so that the flow rate remains consistent as you use the device, no matter the temperature or humidity.

Pressure washing with airless pump sprayers is a great way to clean your car or the walls of your house. It uses water released at high pressure to effectively remove mildew, grime, and other hard-to-remove contaminants.

One of the advantages of the airless pump is that it can be used with a wide range of paints. This includes oil-based, enamel, latex and lacquer. They are ideal for line spraying and construction purposes.

While paint is made up of different chemicals, the component that makes it "paintable" is the solvent. Solvent lowers the viscosity of the paint mixture thus allowing it to be spread over a substrate. Without solvent, all we'd have is sticky, lump... more

One of the features of airless spray systems is better paint control. Because air is absent, overspray is minimized and thus, paint can be directed more predictably and more efficiently towards the surface that is being covered.

Airless pump sprayers have been around since the late 1950s, but people were spraying fluids with compressed air long before that. In 1887, Joseph Binks invented a hand-pumped spraying machine that allowed him to apply whitewash to his basement wa... more

When renting an airless sprayer, you'll want to keep in mind that certain models do a better job of preventing overspray and require less refilling, which can be cumbersome when you're mid-job.

If you are a regular airless sprayer user, you should strip down the components in the head every month. If you use airless sprayer occasionally, you can do the same after every six month interval.

Because airless pump painting systems require no air, they require no compression, which means that they last longer! In fact, the noteworthy durability of most airless pump systems is one of their many benefits.

If your airless pump isn’t working properly, you should have it checked by a professional technician. We are trained in airless spray functionality and are constantly updating our skills and knowledge.

While airless spray systems are effective and efficient, this doesn't mean that surface prep time should be any less. In fact, because of its superior coverage, all details that shouldn't be painted should be completely masked before work begins.

Pressure washer color codes explained: "White is 40 degrees, green is 25 degrees, yellow is 15 degrees, and red is 0 degrees," reports Popular Mechanics. "Black is a low-pressure nozzle used for dispensing soap."

Is the tip in your spraying showing signs of wear? If you’re seeing excessive buildup of coating in the center of your spray pattern, it’s a classic sign the tip is worn and should be replaced.

An airless sprayer is the best tool for priming drywall or painting large commercial spaces, as it creates a nice, even finish without the messiness of a roller or brush.

What’s an injection injury? It’s the formal term for injuries caused by pressurized equipment like airless pump sprayers. While such injuries often look like basic cuts, because the pressure injects the coating or paint into your skin, they can be... more

"The pressure washer makes short work of tough cleaning jobs and solves other problems such as removing flaking or blistered paint," Popular Mechanics writes.

There is some debate about how the pressure washer came to be. Alfred Kärcher invented a hot-water high-pressure washer in the 1950s, but Frank Ofeldt’s steam pressure washer predates his invention by at least 23 years.

While textured surfaces may present a challenge to painters using conventional techniques, airless spray painters usually make short work of them. This is because the paint shot from an airless sprayer adequately penetrates and reaches all of the ... more

Airless sprayers work by pumping paint or other fluids at high pressure through a hose and out the tip of the handheld spray gun. The fluid is dispersed in a fan-shaped pattern that makes for a smooth finish.

Did you know that an airless system is very similar to a pressure washer? However, instead of water, the machine directly sucks up the paint and pushes it out the other end with the force set by the operator.

A piston pump produces paint that is atomized. The atomization of the paint helps to ensure even coverage, especially when painting over large walls and ceilings.

Airless sprayers are designed with convenience in mind. They are portable and designed to meet the needs and requirements of do-it-yourselfers as well as contractors. The heavy duty design and portability of today's airless sprayers makes for a wi... more

The fundamentals of basic airless pump mechanics are simple: the special spray tip and the high pressure of the liquid itself creates an energy that is viscosity and surface tension resistant. In other words, the force that bonds liquid and surfac... more

Airless pump systems used in painting are perfect for large construction jobs, minimizing the stress and amount of detail required to complete the job. Airless pump systems also make cleanup a cinch!

Airless pump sprayers provide a fast and easy to use means of applying paint coatings. The fine mist allows for jobs to be completed with near perfection each time, and the speed with which jobs can be complete saves time.

Airless pumps are fast, economical, and easy to use, which means that less labor is required! In fact, airless pump systems are 4 times faster than brushing or rolling! This means less labor is required, which translates into savings.

On the upstroke of the rod's movement, fluid is drawn into the pump. This happens because a vacuum is created as the rod goes up. The drawn fluid is then pushed out through the hose.

All airless pump sprayers have at least four basic components. These are the motor and drive system, the main pump, a pressure control system, and the spray gun assembly. Optional components include digital gauges and interchangeable spray tips.

Airless pump painting systems are the most versatile of any and all paint spraying systems! Studies show that they are preferred by professional painters and contractors by a margin of three to one! Homeowners prefer them twice as often as they do... more

Vincent van Gogh, although unknown during his time, had some wise words: "I dream my painting, and I paint my dream." Many of his paintings are beautiful dreams to have.

Do you know what makes airless pump sprayers so versatile? Well, they can be used for a variety of applications, including interior and exterior jobs. Moreover, they can be easily transported from one job site to another.

Never exceed the designated pressure for your airless pump sprayer. Not only does it cause excessive wear on the pump and tips, it can in some instances create sufficient pressure to cause the hose to rupture.

One of the ways to dial in the perfect paint job using your airless sprayer is to know the material you're working with. Typically, smaller tips should be used for less viscous paint like lacquers while larger openings are needed for latex paints.

A diaphragm airless sprayer relies on a hydraulic piston, which utilizes suction and a bearing to compress hydraulic fluid so that the paint comes out smoothly.

Airless pump sprayers are used for painting. Pressure causes the paint to go through a hose and out of the tip of the gun in such a way that the droplets are uniformly applied.

Airless pump sprayer applications are immense. They are widely used for coating ceilings, walls, doors, gutters and downspouts. They are also used in "roof restoration" or roof painting.

One of the advantages of an airless paint sprayer is that the paint it uses needs very little thinning. This not only reduces cost and preparation time, it also means that the paint dries more quickly than paint sprayed from an air sprayer.

If you’re experiencing a lot of bounce-back or back-spray, it’s a sign of a problem. Typically, it occurs when you set the pump pressure too high, but it sometimes it indicates problems with the pump itself.

Compact and relatively lightweight, electric pressure washers are great for cleaning your car, outdoor furniture, grills, and patios. These inexpensive systems can put out around 1300 to 1900 psi of pressure.

Don’t forget that airless pumps deliver fluid at pressure, so they can be dangerous. Never direct the unit at your skin or clothing, you can create cuts and abrasions that can be quite serious.

Paint delivered through an airless spray offers a number of advantages. One of these advantages is that any pits and crevices on the surface being painted receive the coating as well.

When using a pressure washer to clean siding on your home, it is important to try to keep water on the front of the siding and not behind it.

The shape of the expelled paint that is produced by an airless paint sprayer is referred to as the "fan." The fan size is measured from top to bottom.

If your tips seem to be wearing at a faster than usual rate, check the pump to make sure the pressure isn’t set too high, and try straining the coating to reduce the volume of abrasive solids and minimize wear.

The term "airless" refers to spray painting equipment that uses high interior pressure instead of air to atomize paints and priming materials for spraying onto a surface.

Did you know that the first paint production facility in America was put up in Boston in 1700 by Thomas Child? This was followed much later by D.R. Averill of Ohio who patented the first ready-mixed paints in 1867.

Wondering how to get rolling? The first step is priming your pump: place it in a trash can, and stick the hose into strained paint. Set the valve to prime, switch on the pump, and turn the pressure up until the paint comes out.

Tips designed for airless pump systems come in a wide range of capacities and spray patterns. Standard tips can accommodate pressures up to 5000 psi, and specialty tips can handle greater fluid flows and higher pressures.

Proper safety protocols must be followed while using a pressure washer. This is important both for the person using the pressure washer and for any people or pets nearby.

Prices for airless spray guns will depend on how intensive your job is. You’ll want to make sure the motor is powerful enough, while keeping the price point at one that fits your budget.

Has it been more than a year since you had your airless sprayer and pump serviced? It’s time to bring it in for a routine checkup and regular maintenance, to keep the pump and key parts in peak operating condition.

Pressure washer facts: Pressure washers can be found that are powered in one of two ways. These power sources are either through electricity or with gasoline.

Because the tips used in airless sprayers determine the pattern and flow of fluid, they’re an important part of any airless pump system. To make tip selection easier and more foolproof, many manufacturers color code tips by type.

"A spray paint compressor is simply an air compressor that is attached to a paint sprayer," the website wiseGEEK writes.

Paint delivered through an airless spray offers a number of advantages. One of these advantages is that fewer coats of paint are needed because of the uniformity of the coating.

Small fine-line projects are best served by using an airless pump. From stains to lacquers or enamels, airless paint pumps are the best for touch up work, spot repair, and small jobs that require precision and quality.

The displacement rod inside of the fluid chamber connects the pump's interior parts to the motorized drive system, and it moves up and down under the power of the motor.

According to experts, many users refer to their airless sprayer as the airless pump, or simply the pump. Because the pump controls how fluids or coatings are atomized and applied, most users consider the pump to be the most critical component.

On diaphragm pumps, leaking hydraulic fluid is one of the most common repair needs. The fluid can get into the paint and cause it to be defective.

Diaphragm pump airless sprayers run continuously, but the constant airflow can lead to spitting or erratic distribution of the paint. A hole in the diaphragm is a common problem.

The repair of airless pumps requires skilled technicians, a good inventory of airless sprayer parts, airless reversible tips and airless spray filters specific to your machine. We have all these things to get the job done quickly and efficiently.

Airless pump systems provide a longer lasting coat than non-airless paint systems. In fact, it is precisely because airless pump sprayers leave such a "clean" and complete coverage that allows the coatings to perform better and last longer.

Setting the pressure too high in your airless sprayer can be costly. The higher pressure accelerates wear on the spray tip, increases waste through overspray, and can over time permanently damage the pump.

When using an airless spray gun, make sure to visualize where you’ll be painting before you begin, then compress the trigger before moving the gun onto your work area.

Airless paint pumps are made out of heavy-duty hardened steel, which has been treated to be resistant to the corrosion potentially caused by the ingredients in the paints.

Diaphragm pumps deliver good pressure control and high flow rates for faster applications. However, they don’t handle highly viscose coatings, can be more difficult to keep clean, and require routine maintenance to perform properly.

If you’re painting a barn, a basketball court, or another large, outdoors space, it may be worth investing in adjustable extension poles for those hard-to-reach corners.

While we tend to not give it a second thought, did you know that paint plays a huge role in our everyday lives? Everything from the goods we use to the walls of our homes are directly affected by the paint industry.

"As a general rule, use the broadest, lowest-pressure nozzle that will deliver adequate cleaning," Popular Mechanics recommends, "because using too narrow a nozzle can cut into the surface you're trying to clean."

Did you know that paint is much more than something that makes things look nice? As it turns out, it also plays a vital role in protecting the substrates it coats by shielding it against oxidation caused by the environment.

The outlet of an airless pump allows paint to flow freely. The outlet requires regular cleaning between each use so that none of the latex solidifies and clogs the opening.

It’s always a good idea to do test sprays on scrap cardboard or any other waste material before stepping up to work on your paint project to see if you have good atomization and the ideal spray pattern.

If you see paint leaking down the outside of the pump, it’s usually a sign the pump packings are worn. To prevent permanent damage to the pump parts, replace the packings at the first signs of a leak.

Having your car pressure washed at least once a year takes the years off and exposes its original shine. It also saves you money on repeated repaints as it significantly extends the life of your current paint job.

Airless paint pumps are rated based upon the volume of paint that they can atomize in a given period of time. The rating system is based on gallons per minute, or GPM.

Some examples of the types of items commonly cleaned with the use of pressure washers include cars, plastic play sets, patios, decks, and outdoor furniture.

Painting using standard paint rollers and traditional paint brushes might seem cost effective in the short term, but in the long run can end up costing at least twice as much as painting using an airless pump system.

If you’re using only one gallon of paint on a job, you might not need an airless sprayer. For bigger jobs, however, spraying is much more time efficient than using a roller or brush, and the end result is often more uniform.

Did you know there are accessories that let you extend your spray reach? Tip extensions and pole guns allow you to reach areas that your spray gun can’t. Both are also often used in pressure washing.

Did you know that one of the fastest ways to paint is with an airless paint sprayer? Typically, an airless system would require only a fraction of the time needed to paint a room with brushes and rollers.

Pressure washer facts: It is reported that compared to a garden hose a pressure washer uses less water while cleaning.

One of the factors that determine the quality of a paint job is the thickness of the coating. Paint that is too thick or too thin is generally unacceptable so the proper application method must be used at all times.

Did you know that you need to keep the nozzle moving whenever you’re pressure-washing? Holding it over the same spot for too long can cause water to cut through the surface that you’re trying to clean.

In order to get an even spray when painting inside corners, aim directly towards where the two surfaces meet. Spray along the corner and not back and forth across it to get a smooth and flawless finish.

When the tip on your airless sprayer begins to wear, it applies significantly more paint in a much smaller area. In addition to wasting paint, it makes it nearly impossible to produce a smooth, even finish without signs of overlap.

Airless pumps can come in gas, electric and hydraulic types and are among the best pump types for painting. This is because of the uniform jet spraying of airless pumps, which also have better atomization qualities, enabling a more uniform sprayin... more

While air sprayers use air to atomize paint particles, did you know that airless sprayers use hydraulic pressure to do the same job? Removing air from the system results in thicker, more uniform coats and minimizes any overspray.

Can you use airless sprayer as a pressure washer for cleaning driveways? Well, the answer is No! Using an airless pump sprayer as a high pressure cleaner would lead to early wear of the seals and attachments.

Piston packings create a seal inside of the pump's cylinder when the rod moves up and down. This action is like the pump of a syringe when it is pushed with a finger.

The key components in an airless pump system include the spray gun, spray tip (and spray tip guard), the motor (and motor drive system), the pump/fluid section, and the pressure control. These systems can come in both handheld and mobile (rolling)... more

It’s important to have packings in the pump replaced at the first sign of wear. Even a slight bit of wear can affect sprayer performance, and excessive wear puts more expensive parts such as the displacement rod, cylinder or sleeve at risk.

When using a pressure washer to clean siding on your home, it is important to limit the water to the siding itself and avoid any windows.

Before paints were commercially available, painters were expected to bring their own mortar and pestle to the job site and grind their own pigments into the paint base.

Did you know paint manufacturers will often indicate their recommended spray tip sizes directly on the container? This is useful if you are unsure about which spray tip to use for specific paints.

Ever wonder what the tip numbers of your airless pump nozzles mean? Apparently if you double the first number, you get the width of the spray in inches and the last two numbers denote the size of the tip's opening.

Need to know how long an airless sprayer tip last? While the life of an airless pump sprayer ultimately depends on the materials used, on average sprayer tip can last between 125-250 gallons of paint.

Want to know how much faster applying paint with an airless pump sprayer is as compared to roller and brush? You would be surprised to know that airless spray is considered 4 times faster than the traditional paint techniques.

When varnishing wooden lawn furniture you should consider using a 411 tip for the project as it will provide the quality of coverage you need.

In contrast to air compression pump systems, which inject compressed air into the fluid stream, airless pumps use their specially designed tips to create a maximum of controlled power and easily manipulated fan pattern.

For even sprays, move your hand quickly and consistently across the surface you want to paint. Hold it over one spot for too long and the paint could run. Use several thin sprays to achieve the desired finish.

Versatility is a benefit of airless pump systems, as they can be used for a wide range of coatings and coating materials for both interior and exterior applications. The portability of airless pumps means that they can be moved from job to job wit... more

Choosing a right tip for the right job is very important. While light and thin coatings should be sprayed with smaller orifice tips, thicker materials use a larger orifice tip.

While an airless paint sprayer is definitely easy and convenient to use, proper care should always be used when operating it. For instance any leak... more

Most air pumps can be fitted with tips that let you spray thin liquids like varnish, stain, and lacquer. With specialized spray tips, they can also... more

Oil-based paints will always come packaged inside of a metal can because the ingredients can react with plastic, causing the oil paint to become in... more

Perhaps the greatest benefit of airless sprayers is the undeniable quality they provide. In fact, airless pump spraying systems produce an even coa... more

Contact us ar 813-500-2570, you know that in airless spray pumps, the fast-moving high pressure liquid (paint, lacquer, stain, etc.) stream itself ... more

Airless piston pumps tend to be more versatile than diaphragm pumps, but they require a larger outlay up front. To extend their lifespan and protec... more

About 85 percent of painters and contractors prefer to use airless paint pumps because they require less maintenance and are easier to prime when moving between sections of a project.

Spray painting history: While spray painting is said to have been invented in the year 1892, aerosol spray paint made its debut nearly 60 years later.

Some people tilt their spray guns, which is incorrect. For the best coverage, we recommend keeping the gun perpendicular to the area you are working on.

Having trouble getting a clean spray? Your intake screen may be clogged or dirty. Make sure to strain your paint, as this also helps with creating ... more

Having trouble getting a clean spray? Your intake screen may be clogged or dirty. Make sure to strain your paint, as this also helps with creating an even spray.

Airless pumps come in numerous sizes, types and horsepower amounts. This allows you to customize your experience per job, a benefit that includes time, money, and energy savings. You can also combine the different pump types per job.

Before using a pressure washer, precautions are recommended to help ensure that damage to the surface being cleaned does not occur.

The purpose of an airless paint sprayer is to atomize large amounts of paint. To atomize means to break the liquid apart into minute particles to create a fine spray of the liquid.

Radiant heaters don’t work like wall or space heaters. Instead of heating the air around them, they focus the heat on nearby objects, making them ideal for keeping the porch warm even on a cold winter day.

Because the solids contained in coatings are abrasive, all airless pump spray tips are subject to wear. To prolong tip life, clean tips properly, and replace them before the wear pattern begins to adversely affect application flow or finish.

Spraying test patterns on scrap cardboard can provide clues regarding what might be causing problems with your airless sprayer. If it produces alternating bands of light and heavy coating, either the pressure is set too low or the motor or pump ar... more

Have worn sprayer tips repaired or replaced before the wear begins to hamper the quality of the coating you’re applying. Because worn tips are less efficient, they consume more paint and require more labor time to achieve the desired finish.

What is the deadband? Where mechanical airless pumps are concerned, it refers to the brief fluctuation or pulsation that occurs when the motor turns on or off in response to changes in fluid pressure.

Did you know that airless pumps can be powered by different types of motors? Some run on electricity while others are assisted by compressed air. Others, still, are powered by hydraulic motors.

The flow rate of airless pumps is one of their many benefits! Because they do not require any compressed air, they make up for this is output through the use of a special high pressure spray tip. This spray tip size and pressure is what gives the ... more

Piper Payne said of painting, "There is something beautiful about a blank canvas, the nothingness of the beginning that is so simple and breathtakingly pure. It’s the paint that changes its meaning and the hand that creates the story."

Fence wash and painted